Shanghai, China
Business Type:
Business Range:
Industrial Equipment & Components, Instruments & Meters
Main Products:
Management System Certification:
ISO 9001
OEM/ODM Service
French Speaker

Flowmeter, Corrosive Gas Meter, Fluid Meter manufacturer / supplier in China, offering Variable-Area Water / Acrylic Flowmeter with Metallic Measuring Tube (JH-LZDC), Electromagnetic Flowmeter (JH-DCFM-CS), SS304 Turbine Gas Meter for High Temperature Air (JH-LWQ) and so on.

Gold Member Since 2017
Audited Supplier
Supplier Homepage Products Flowmeter Liquid flowmeter Variable-Area Water / Acrylic Flowmeter with Metallic Measuring Tube (JH-LZDC)

Variable-Area Water / Acrylic Flowmeter with Metallic Measuring Tube (JH-LZDC)

You Might Also Like


Basic Info

Model NO.: JH-LZDC
Measuring Media: Liquid and Gas
Measuring Principle: Mechanics
Measurement Object: Closed Pipeline
Certification: CE, RoHS, ISO
Body Material: Stainless Steel
Flow Range: Water(20c):10-300000L/H
Power Supply: 24VDC
Medium Temperature: -20-120c
Output: 4-20mA
Work Pressure: 1.6MPa/4MPa
Cable Interface: M20*1.5, Pg11, 1/2 NPT
Protection Class: IP65
Trademark: JH
Specification: CE, ISO
Origin: Shanghai
HS Code: 9026100000

Product Description

Variable area Flowmeter

LZDC Series Variable-area Flow-meter can also be called metal-tube rotameter, Variable -Area Flow-Meter with Metallic Measuring Tube has the following advantages, simple construction, convenient maintain work, linear graduation, wide adaption which can be used to measure the flow of liquids and gas. Compared with glass-tube rotameter, this type of flow meter has the characteric of high temperature and pressure resistance, high security, easily read, and etc. It also can be used to measure the flow of corrosive medium and opaqueness medium. The meter pipe and flange are made of Icr18Ni9Ti or 18Ni12Mo2Ti. The floater is made of stainless steel. If the floater and lining are both corrosion resistant, it is made of PTFE.

Working principle:
Variable -Area Flow-Meter with Metallic Measuring Tube is made up of two parts, flow sensor and flow indicator( picture 1) Floater is installed inside the conical measuring pipe. Because of the function of the fluid, it can be shifted freely up and down in the conical pipe. The biggest outer diameter of the floater and the annular area of the tapered tube change with the location of the floater. When the flow rate of the fluid is stable to one number, the floater is also in a dynamic balance. By the flow indicator connected with the taper measuring tube, the magnetic signal of the floater would be delivered by non-contact way, that is to say, the indicator can detect and deal with the flow value by the way of magnetism delivery and finally show the flow value by the pointer, which is showed on the dial of. At the same time, LCD can also read the instantaneous or the accumulated flow value, and output the standard two wire(4-20)mA signal / HART protocol.

- Double lines LCD, showing both instantaneous and accumulated flow.
- Broader ratio of flow rate 10: 1.
- More stable signal output: Construction of single axis and non-touching magnetic coupling.
-Fully metal-made body, suitable for high temperature, high pressure and corrosive media.
-Can be used even in flammable, explosive and harsh working environments.
- Power supply: Two-wire system, battery and AC for selection
-With functions of data recovery, backup and power failure protection
- New design for less pressure loss, little maintenance and long life.

Technical parameters:

Send your message to this supplier

avatar Ms. Li Li

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like


Contact Supplier